search.noResults

search.searching

note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
150.10-JETI parting-off blades onto the VDA turret and offer streamlined delivery of high-pressure coolant to the cutting zone without using hoses. The blades and adapters remove heat during parting-off operations. Coolant is delivered internally to the adapter via the turret and then reaches the cutting zone through the coolant holes in the blades. Seco Tools LLC Ph: 248-528-5451 Web site: secotools.com


Grinder Balancing System


The Marposs/Dittel M7002/MA7002 next-generation dual plane balancing systems for high-precision grinding ma- chines are now available. The systems have a new determin- istic balancing algorithm and a specially designed balancing head. The units control the balancing heads directly whether in the stational position or during high speed operation (up to 30,000 rpm) to automatically detect, evaluate and monitor imbalances on spindle bearings. Marposs


Ph: 888-627-7677 Web site: marposs.com


Carbide


Milling Cutters The MC232 Perform product line is a cost- effective new cutter type available with two, three or four fl utes in a diam-


eter range of 1/8" to 5/8" (2-20mm). Smaller diameters are of- fered with cylindrical shank and larger diameters with a Weldon shank of higher horsepower cutting. The MC232 is designed to be economical and suitable for a wide range of applications. Walter USA LLC Ph: 800-945-5554 Web Site: walter-tools.com


Swiss Turning Machine The Traub TNL20, a sliding/ fi xed headstock automatic lathe, adds numerous improvements in productivity, precision, and automation to the TNL line. It can be equipped to use up to four tools simultaneously. An optional robot cell integrated in the machine is available for


automated loading of blank shafts or preformed workpieces. The machine will be of interest to the connector and medical manufacturing users. The TNL20 is launched in two versions. One equipment level is the TNL20-9, which has nine linear axes, two turrets (each with eight stations, maximum 12,000 rpm, 2.0 kW), a back working attachment (four stations), and an autonomous counter spindle. A second version, the TNL20-11, is equipped with an additional front working attachment (six stations, three of which are live, maximum 12,500 rpm, 2.0 kW) on an autonomous X/Z slide. Index Traub


Ph: 317-770-6300 Web site: www.indextraub.com


Workholding Modules High-density, high-accuracy and fl exibility to accommodate different part sizes or multiple parts are benefi ts of Kurt’s SeraLock Towers, and WedgeLock and MoveLock workhold- ing modules. SeraLock Towers facilitate machining a group of dissimilar workpieces or a high density of a single part, all in the same setup. The sys- tem employs reusable clamping components that can be mixed and matched. This system of self-aligning modules creates the equivalent of a custom fi xture with the ability to be reconfi gured for changing part sizes. The SeraLock serrated mounting surfaces align and clamp accurately and quickly because of the interlocking serrations on the tower base and the clamping device. WedgeLock or MoveLock modules have quick, repeatable accuracy and have small strokes to minimize clamping time. Kurt Manufacturing Co. Ph: 877-226-7823 Web site: www.kurtworkholding.com


Combined Thread Milling, Tapping A new thread milling system combines the advantages of thread milling and thread tapping. With Walter’s new T2711/2712, multiple thread sections can be machined simul- taneously with high cutting parameters, enabling machining times comparable to those of thread tapping and forming to be achieved. In addition to quick machining, users also benefi t from the high process reliability of the thread milling process


August 2017 | AdvancedManufacturing.org 91


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100